THE GENUINE KBS FUEL TANK SEALER KIT!
A great 3-Step cost savings kit designed to repair fuel tanks of motorcycles, generators, lawn mowers, tractors, snowmobiles, or other small tanks up to 20 Litres.
Detailed instructions included. Satisfaction guaranteed!
Regular Kit (20L Tank)
Features
Silver metallic permanent coating
Eliminates all rust & corrosion
Impervious to all fuels, Ethanol additives (E10) & most solvents
Permanently seals pinholes & weld seams
Flexible to expand & contract.
Non-flammable
Environmentally safe
Formulated and tested for Australian and New Zealand fuels
.
Kit Contains:
This kit contains our KBS AquaKlean (a water-based, heavy-duty, cleaner/degreaser) and KBS RustBlast (a powerful rust remover/metal etch) to obtain a permanently sealed, rust-free fuel tank.
These KBS prep products are formulated with a unique Oxygen-Block Technology which reduces the occurrence of flash rust by over 80% and extends rust-free storage times by leaving a temporary protective coating in addition to a zinc phosphate film.
1 Litre AquaKlean
1 Litre RustBlast
250mls Gold Standard tank sealer
1 pair of KBS Black Nitrile gloves
Comprehensive instructions included



Holemaker Silver Series Annular Cutter 45mmx25mm DOC
Champion E-Clip Suit 5/16 Shaft -50pk
Champion M10x25mm Socket Head Cap Screw-Din912-Gr12.9 - 4pk
Champion M8 x 40mm Socket Head Cap Screw-Din912-Gr12.9-6pk
Diamond Wheel 180gm to Suit DDXP, 500X & 750X Drill Doctor
1/2in Long Ratchet Flexible Head 45 Teeth 400mm
Teng 8pc TX Set With Ball Point End (Folding)
Drill Doctor 19mm Chuck To Suit DD500X & DD750X
Teng 1/2in Dr. Torque Wrench 40-210Nm / 30-150ft/lb L/R
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
Champion M22 x 32mm x 2.5mm Aluminium Washer - 25pk
Groz 9/16 x 16in / 400mm Roll Head Pry Bar
ITM Push Girder Trolley-1 Ton-64-203mm Beam Width
Teng Digital Torque Wrench 20 - 200Nm
Champion M8 x 35mm Socket Head Cap Screw-Din912-Gr12.9-6pk
Groz 1/2in BSP F-R Unit 106CFM / 3000LPM
AIRBRUSH PAINT 30ML COLOUR SHIFT GALAXY ACRYLIC LACQUER SCALE MODELLERS SUPPLY
ProEquip Hydraulic Truck Wheel Dolly 750kg /1650lb Cap.(1)
Champion E-Clip Suit 3/8 Shaft -100pk
Holemaker Pilot Pin 4.73mmx102mm (12-14mm / 50mm DOC)
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
Champion M12 x 22mm x 2.5mm Aluminium Washer - 50pk
FORMULA AIRBRUSH COMPRESSOR 1/4HP WITH FILTER/REGULATOR
Teng Oil Filter Removal Plier
Champion Retainer Spring To Suit 19/64in Shaft -50pk
ProMarine Expandable Rod Rack - Red
Champion 1/4in Male Air -Line Coupling Nitto
JUPIO POWERLED 150 LED LIGHT - TAKES NPF SERIES BATTERY 




