Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI BLUE 400ML
$26.20 incl. GST
In stock
Related products
$449.95 incl. GST
$429.95 incl. GST
$199.95 incl. GST
$171.95 incl. GST
$167.95 incl. GST



Teng 9pc Ball-End AF Hex Key Set - 5/64-3/8in
Teng 1/4in Dr. Palm Ratchet 45T
Holemaker Silver Series Annular Cutter 36mmx50mm DOC
1/2in Long Ratchet Flexible Head 45 Teeth 400mm
NITECORE LI-ION RECHARGEABLE 18650 BATTERY 3600MAH 3.6V
Teng 8pc Fold-Up Key Set - Ft/Ph/Pz/Hex/TX
Teng 1/2in Dr. Torq. Wr. 70-350Nm / 50-250ft/lb L/R
Teng 1/4in Dr. Ratchet Handle 72T
Holemaker Pilot Pin 4.73mmx102mm (12-14mm / 50mm DOC)
Holemaker Cutting Fluid 20 Litre
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
Teng 7pc Fold-Up Metric Hex Key Set - 1.5-6.0mm
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
CAR STEREO BOSE AMP ADAPTER
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
Champion 3/8in Hose Barb Air -Line Nipple Nitto -10pk
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb 


