Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI BLUE 400ML
$26.20 incl. GST
In stock
Related products
$179.95 incl. GST
$449.95 incl. GST
$399.95 incl. GST
$699.95 incl. GST
$199.95 incl. GST
$171.95 incl. GST



Holemaker Silver Series Annular Cutter 16mmx25mm DOC
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
Groz 3/8in BSP Regulator 88CFM / 2500LPM
Teng 7pc 3/8in Dr. TX Bit Set - TX10-TX40
Teng 9pc Long Arm TX Key Set - TX8-TX40
Diamond Wheel 180gm to Suit DDXP, 500X & 750X Drill Doctor
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
AMPLIFIED AUDI A2 / A3 / A4 / S3 / TT 1999 -2014
DYNAMAT DYNACORE 1 INCH 32" x 54" 1 SHEET
M7 AIR HAMMER CHISEL LIMITER SPRING
Teng 8pc TX Set With Ball Point End (Folding)
NITECORE LI-ION RECHARGEABLE 18650 BATTERY 3600MAH 3.6V
Teng Steel Magnetic 4-Can Tray 460mm 






