Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI RMZ YELLOW 400ML
$26.20 incl. GST
Only 2 left in stock
Related products
$199.95 incl. GST
$449.95 incl. GST
$59.95 incl. GST
$449.95 incl. GST
$167.95 incl. GST



ABS PLASTIC SHEET 300 X 240MM BLACK (2 PACK)
Panasonic AA Battery Alkaline (24pk)
Holemaker Silver Series Annular Cutter 43mmx50mm DOC
Holemaker Uni Shank Tinite (Tin) Cutter 15mmx25mm
Holemaker Uni Shank Tinite (Tin) Cutter 14mmx25mm
Holemaker Uni Shank Tinite (Tin) Cutter 27mmx50mm
Holemaker Uni Shank Tinite (Tin) Cutter 12mmx25mm
Holemaker Uni Shank Tinite (Tin) Cutter 17mmx25mm
Teng 7pc Ball-End Metric Hex Key Set - 2.5-10.0mm
Teng 10pc 5.5mm Drill Bit (DIN338)
AUTOMOTIVE BATTERY AGM 12V 12AH 780CCA BY SSB ULTRA HIGH PERFORMANCE DRY CELL
Holemaker Uni Shank Tinite (Tin) Cutter 28mmx25mm
Holemaker Uni Shank Tinite (Tin) Cutter 45mmx25mm
Holemaker Uni Shank Tinite (Tin) Cutter 46mmx25mm
Holemaker Uni Shank Tinite (Tin) Cutter 17mmx50mm
THB Inline Coupler 3 Way Single Action
Holemaker Uni Shank Tinite (Tin) Cutter 12mmx50mm
Teng 1/2in Dr. Torque Wrench 70-350Nm / 50-250ft/lb
Teng 9pc Long Arm TX Key Set - TX8-TX40
Holemaker Uni Shank Tinite (Tin) Cutter 44mmx50mm
Teng Digital Torque Wrench 20 - 200Nm
Holemaker Pilot Pin 4.73mmx102mm (12-14mm / 50mm DOC)
M7 Ripping Chisel 175mm Long To Suit SC211C / SC212C
Groz 1/4in BSP Regulator 21CFM / 600LPM
Holemaker Uni Shank Tinite (Tin) Cutter 25mmx50mm
AXXESS BACKUP CAMERA RETENTION HARNESS MAZDA 2007 - 2015 




