Genuine acrylic paint formula for motorcycles. High wear resistance and surface hardness. Polish the surface with sandpaper if necessary. Remove dust, grease and other contaminants. Protect areas outside the object. Shake the can for about 3 min. Test painting on small invisible area is recommended. Spray from about 20 -30 cm distance. Spray first a very light thin coat, wait for about 30-60 seconds. Thereafter spray 3 layers, first horizontal, then vertical and finally horizontal. Wait for about 30-60 seconds and repeat if necessary. After use, clean the nozzle by turning spray can upside down and spray until only propellant comes out. For higher gloss and depth of color we recommend to apply several layers of Car-Rep clear coat on top of the paint.
CAR-REP AEROSOL MOTORCYCLE SUZUKI RMZ YELLOW 400ML
$26.20 incl. GST
Only 2 left in stock
Related products
$199.95 incl. GST
$399.95 incl. GST
$157.99 incl. GST
$399.95 incl. GST
$429.95 incl. GST



Champion 1/8in x 3/4in Roll Pin -20pk
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
Teng 1/4in Dr. Torque Wrench 5-25Nm / 4-18ft/lb
THB Manifold 3 Way Single Action Coupler
Champion M16 x 24mm x 2.5mm Aluminium Washer - 50pk
Teng Hook-On Steel 4-Can Tray 460 x 100 x 140mm
A124 Mitsuba A/13 Classical V-Belt
Groz 3/8in BSP F-R-L Unit 63CFM / 1800LPM
ITM Air Hose 10mm (3/8in) x 15M Hybrid Polymer w/ Fittings
ITM Push Girder Trolley-2 Ton-88-203mm Beam Width
Teng 9pc Ball-End Metric Hex Key Set - 1.5-10.0mm
Champion 3/16in UNF Nylon insert Self-Locking Nut -20pk
Champion Retainer Spring To Suit 11/64in Shaft -50pk
Teng 1/2in Dr. 24in / 600mm Power Bar
1/2in Long Ratchet Flexible Head 45 Teeth 400mm
Teng 1/4in Dr. Ratchet Handle 72T
FM3000 COMPRESSOR CRANKCASE GASKET 





